Luma3ds v6.0更新内容整理

Luma3ds v6.0今日更新了新版本，从之前的v5.5版这次直接更新到了6.0版，这个大幅度的版本进化标准着新版有很大的改动，具体如下：

Add support for launching >= 6.x/7.x emuNANDs when the sysNAND is on a lower version (on entrypoints other than a9lh)

添加支持引导高于 6.x/ 7.x的虚拟系统当真实系统是较低版本时(并不限于A9LH破解) PS.也是就是LUMA的虚拟系统可以从6.0开始引导了不黑屏

If you want to launch a 3.x or 4.x NAND, you have to place a recent enough firmware.bin (corresponding 10.x for example) under the luma folder (this is not a new feature)

如果你想引导3.x或4.x的NAND，你必须把最近相对应的firmware.bin(例如10.x的)LUMA文件夹下(这不是一个新功能) PS.这个就这么理解吧

Conversely, firmware.bin support has been removed when booting a >= 6.x NAND. "SysNAND is updated (A9LH-only)" has been renamed to "Use SysNAND FIRM if booting with R (A9LH)" to reflect its only new purpose

相反，引导高于6.x的NAND时的firmware.bin支持已被删除。 “SysNAND更新(A9LH专用)”已更名为“使用SysNAND FIRM如果与R(A9LH)启动”，以反映其唯一新的目标 PS.同样字面理解

If you were using firmware.bin solely for BootNTR, update the latter (BootNTR has been updated to support 11.0)

如果您使用的firmware.bin仅供BootNTR，更新后(BootNTR已经被更新，以支持11.0) PS.也就是NTR在LUMA 11.0可以直接使用了

Add support for loading titles' code section from /luma/code_sections/.bin (this is useful for homebrew like SaltySD)

添加从/luma/code_sections/.bin装载标题“代码段支持(该方法适用于像SaltySD自制)PS.区域码引导，变更版本更容易了?

Enable the reboot patch on 9.0/9.1/9.2 FIRM

启用9.0 / 9.1 / 9.2 FIRM重启补丁

Implement a PIN-checking system: you can set a 4-key combinaison (using A, B, X and Y) that be checked when Luma3DS is launched (thanks to @reworks)

实现一个PIN密码检查系统：你可以设置一个4键combinaison(使用A，B，X和Y)时Luma3DS启动(感谢@reworks)的检查 PS.LUMA系统开机密码?大姐你有没有搞错?

If you want to change your PIN, unselect the corresponding option in the configuration menu, save your configuration settings, then set that option again

如果你想改变你的密码，取消选择在配置菜单中相应的选项，保存配置设置，然后重新设置该选项

The screens' brightness is now updated "interactively" when the corresponding option in the configuration menu is changed. This works even if the screen has been initied before Luma3DS has started running

屏幕“亮度现已更新”交互“时，在配置菜单中相应的选项被改变。这个工程即使Luma3DS已开始运行之前屏幕已initied PS.亮度相关的设置，无关紧要

Replace "Enable splash screen with no screen-init" by "Display splash screen before payloads" to fit a category of splash screens (as the screens will now be initied if and only if there are splash screens to display)

替换“启用闪屏，没有屏幕初始化”的“显示启动画面之前的有效载荷”，以适应闪屏的类别(如屏幕现在将initied当且仅当有闪屏显示)PS.相对应的设置里的名字也换了

The luma folder will now be created automatically when saving the configuration for the first time (thus it has been removed from the release archive)

LUMA这个文件夹将在首次配置时可以自动创建(因此这个文件夹已经从最新版本重移除了) PS.也是个无关紧要的

Other minor adjustments have been made to enhance the user experience

其他小的调整已对提升用户体验